All data is for information only------(Home)
	PRODUCT DATA of Rene 41

Material

Rene 41

Product Datasheet

RENE-41_DS_US_EN Haynes R-41

General Information

René 41 is a vacuum-melted precipitation-hardening nickel-base alloy designed for highly stressed parts operating between 650C and 980C. Its applications include after burner parts, turbine castings, wheels, buckets, and high-temperature bolts and fasteners. René 41 is available in the form of sheet, bars, and forgings.

Chemical Composition

Ni-19Cr-11Co-5Fe-4.3Mo-3.1Ti-1.5Si-0.09C-0.006B

	EXPERIENCE IN PRACTICE

Equivalent Designations

HAYNES R-41; Udimet R-41; Pyromet Alloy 4

	PHYSICAL PROPERTIES

Specific Gravity

8.25

	ELASTIC PROPERTIES

Tensile Modulus

218 GPa

Shear Modulus

83.4 GPa

Poisson Ratio

0.31

	THERMAL PROPERTIES

Thermal Conductivity

11.5 W/m.K

Thermal Expansion Coefficient

13.5 μstrain/°C

Specific Heat

0.452 J/g.K

Melting Range

1320 to 1370 °C

	RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY

Stress Corrosion Status

High Resistance to SCC: Table 1 Data Quality: Design Data

Bimetallic Corrosion

Can be connected without any restriction to: 400 series Stainless steel Can be connected in a non-controlled environment to the above and 300 series stainless steel, Ti and Ti-alloys, Cr, Cu, brasses, Cu-Ni, Al-bronzes, Si-bronzes, Can be connected in a clean room environment to above and Ag, SnPb alloys, Sn, Pb, low C steel, Al-Cu alloys, Cd, Au Needs specific measures: All others Test:ECSS-Q-ST-70C Rev.1 Table 5.1 Data Quality: Design Data

Welding

Sound fusion welds are dependent on cleanliness and good joint fit-up. Inert-gas-shielded arc welding with a direct current power supply gives best results. Shielding gas should be used for both the arc and back-up. The weld area should be kept cool by use of copper back-up bars or water-cooled fixtures.