| Data still to be completed------(<---links) | |
|---|---|
| PRODUCT DATA of Sn60Pb40 |
| Material | Sn60Pb40 |
| General Information | Soft Solder Sn60 Space quality |
| Product Type | Wire, Bar and Flux-cored Wire |
| Chemical Composition | 60% Sn, 40% Pb |
| Name of Manufacturer | ELSOLD GmbH & Co. KG
Hüttenstraße 1 D-38871 Ilsenburg, Deutschland Phone:+49 39452 48 79 12 Fax:+49 39452 48 79 66 E-Mail: O.Kroll@elsold.de Web: www.elsold.de |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Commercial Product |
| Cost Range | Low |
| Equivalent Designations | 60 Tin Solder, S-Sn60 Pb40 E, SnPb40 |
| Space Experience | Good |
| PHYSICAL PROPERTIES |
|---|
| Specific Gravity | 8.5 @ Room Temperature |
| ELASTIC PROPERTIES |
|---|
| Tensile Modulus | 25.1 to 26 GPa Remark: Room temperature data from Cryogenics 48 (2008) 497-510 |
| THERMAL PROPERTIES |
|---|
| Temperature Range | 80 °C(maximum) Remark: Suitable for extensive periods at +80°C or short periods to a maximum of +120°C. |
| Thermal Expansion Coefficient | 16 μstrain/°C @ Room Temperature |
| Melting Range | 183 to 188 °C |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| Temperature Range(space) | Suitable for extensive periods at +80°C or short periods to a maximum of +120°C. |
| SPECIAL RECOMMENDATIONS |
|---|
| Special Recommendations | Recommended for pre-tinning of component leads (see ECSS-Q-70-08) and can be used for soldering stranded wire. · For assembly of components on printed circuit boards use type 63 Sn. |