| All data is for information only------(<---links) | |
|---|---|
| PRODUCT DATA of Chemglaze L300 |
| Material | Chemglaze L300 |
| Product Type | Low-temperature-curing, Electrically-conductive, Matt-black Paint |
| Chemical Composition | Polyurethane |
| Name of Manufacturer | Lord Corporation
111 Lord Drive, P.O.Box 8012, Cary, NC 27512-8012, USA +1 919 468 5979 1 919 469 5777 www.lordcorp.com Lord Corporation (Europe) Ltd Barton Dock Rd., Stretford, Manchester M32 0ZH, UK +44 (0)161 865 8048 44 (0)161 865 0096 www.lordcorp.com |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Commercial Product |
| Cost Range | Low |
| Lot Reproducibility | Good |
| Equivalent Designations | Aeroglaze L300 |
| Space Experience | Fair |
| PHYSICAL PROPERTIES |
|---|
| Solid Content | 22 % Data Quality: Manufacturer's data |
| Viscosity | 400 cP Data Quality: Manufacturer's data |
| Shelf Life | 6 month @ 20°C |
| ELECTRICAL PROPERTIES |
|---|
| Electrical Surface Resistivity | 3000 ohm @1V 1V, nonconductive substrate |
| OPTICAL PROPERTIES |
|---|
| Thermal Emittance | 0.85 Remark: ECSS-Q-70-09 |
| Solar Absorbtance | 0.955 Remark: ECSS-Q-70-09 |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| Flammability | Pass 21% O2. (on 1mm thick Aluminium foil). Test: NASA NHB 8060-1B |
| Thermal Cycling | Pass Test: ECSS-Q-70-04 |
| Outgassing | TML = 1.52%, RML = 0.9%, CVCM = 0.02% Test: ECSS-Q-70-02 |
| SPECIAL RECOMMENDATIONS |
|---|
| Special Recommendations | Recommended cure: 16 HoursHH at 65°C after last layer of paint has been applied ECSS-Q-70-35. · This paint (like most others) is not recommended for use in badly vented places where high electrical fields are present in the vicinity (corona risk). · Quality control tests by micro-VCM (ECSS-Q-70-02) are recommended. · Flammability test on 1mm thick Aluminium substrate in 21% O2. Material burns when applied to 7.6 micron Kapton. Configuration test mandatory. · Use with Pyrolac P123 Primer for better adhesion. · Difficult to procure in Europe. |