All data is for information only------(<---links)
	PRODUCT DATA of AA3004-H12

Material	AA3004-H12
Processing and Assembly	H12 temper: product is strain-hardened (quarter hard) to obtain the desired strength without supplementary thermal treatment
Chemical Composition	0.8-1.3Mg, 1-1.5Mn, rem Al

	EXPERIENCE IN PRACTICE

Development Status	Commercial Product
Cost Range	Low
Lot Reproducibility	Good
Equivalent Designations	A-M1G, AA 3004
Space Experience	Good

	PHYSICAL PROPERTIES

Crystal Structure	Face centered cubic (fcc)
Specific Gravity	2.72
Magnetic Properties	Nonmagnetic

	ELECTRICAL PROPERTIES

Electrical Volume Resistivity	4.1e-8 ohm.m
Electrical Conductivity	42 %IACS

	THERMAL PROPERTIES

Thermal Expansion Coefficient	23.9 µstrain/°C
Melting Range	629 to 654 °C
Specific Heat	0.893 J/g.K

	RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY

General Corrosion Status	No specific corrosion protection required
Stress Corrosion Status	High Resistance to SCC: Table 1 Data Quality: Design Data
EMF vs SCE	-0.76 V
Bimetallic Corrosion	Can be used in a non-controlled environment: Al alloys, Cd Can be used in a clean room environment: Mg, Sn-Pb alloys (all), Sn, Pb, Zn, Be Needs specific measures: All others Data Quality: Design Data