| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of MAPSIL 213 |
| Material | MAPSIL 213 |
| Product Datasheet | mapsil_213 |
| Product Type | Encapsulating resin (2-part) or transparanet conformal coating (3-part), electrically insulating |
| Chemical Composition | Elastomeric Silicone |
| Name of Manufacturer | Société MAP S.A.
Z.I. rue Clément Ader, F-09100 Pamiers, France +33 (0)5 34 01 27 00 +33 (0)5 61 60 28 77 map@map-coatings.com www.map-coatings.com |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Special Commercial Product |
| Cost Range | Medium |
| Lot Reproducibility | Good |
| Space Experience | Fair |
| PHYSICAL PROPERTIES |
|---|
| Shelf Life | 6 month Data Quality: Manufacturer's data |
| ELECTRICAL PROPERTIES |
|---|
| Electrical surface resistance | 1e12 ohm(minimum) Remark:depends on coating thickness Data Quality: Manufacturer's data |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| Temperature Range(space) | -100°C to +200°C. |
| Outgassing(Avg data) | TML = 0.30%, RML =0.27%, CVCM = 0.04%
Test:ECSS-Q-70-02 |
| SPECIAL RECOMMENDATIONS |
|---|
| Special Recommendations | Room temperature (with activator). Cured by heating. · Fully evaluated for application by ESA-ESTEC (QM division). |