All data is for information only------(Home)
PRODUCT DATA of Inconel 617
MaterialInconel 617
Product DatasheetInconel alloy 617
General InformationAlloy 617 is a solid-solution, nickel-chromium-cobalt-molydenum alloy with an exceptional combination of high-temperature strength and oxidation resistance. The alloy also has excellent resistance to a wide range of corrosive environment, and it is readily formed and welded by conventional techniques.
Use in SpacecraftUsed in aircraft, and land based gas turbines. Especially useful at temperatures in excess of 980 C
Product TypePlate, bar
Chemical Composition3Fe, 10-15Co, 20-24cr, 0.6Ti, 8-10Mo, 0.8-1.5Al, 0.006B, 0.5Cu, 0.15C(max), rem Ni
EXPERIENCE IN PRACTICE
Development StatusCommercial Product
Space ExperienceLimited
PHYSICAL PROPERTIES
Specific Gravity8.36
ELASTIC PROPERTIES
Tensile Modulus211 GPa
Shear Modulus81 GPa
Poisson Ratio0.3
ELECTRICAL PROPERTIES
Electrical Volume Resistivity0.00000122 ohm.m
THERMAL PROPERTIES
Thermal Conductivity13.4 W/m.K
Thermal Expansion Coefficient11.6 μstrain/°C
Remark:@Temperature 20.0 - 100 °C
Specific Heat0.419 J/g.K
Melting Range1330 to 1380 °C
RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY
Bimetallic CorrosionCan be connected without any restriction to: 400 series Stainless steel
Can be connected in a non-controlled environment to the above and 300 series stainless steel, Ti and Ti-alloys, Cr, Cu, brasses, Cu-Ni, Al-bronzes, Si-bronzes,
Can be connected in a clean room environment to above and Ag, SnPb alloys, Sn, Pb, low C steel, Al-Cu alloys, Cd, Au
Needs specific measures: All others
Test:ECSS-Q-ST-70C Rev.1 Table 5.1
Data Quality: Design Data
MachinabilityAlloy 617 has good fabricability. Forming, machining, and welding are carried out by standard procedures for nickel alloys
WeldingAlloy 617 has excellent weldability. Inconel Filler Metal 617 is used for gas-tungsten-arc and gas-metal-arc welding.