| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of Electrodag 501 |
| Material | Electrodag 501 |
| Safety Datasheet | msds Electrodag 501 |
| Product Datasheet | Electrodag 501 |
| Product Type | Electrically conductive black paint. |
| Chemical Composition | Fluorinated binder |
| Name of Manufacturer | Acheson Colloiden
Postbus 1, NL-9697 ZG Scheemda, The Netherlands +31 597 59 13 03 +31 597 59 25 52 www.achesonindustries.com |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Commercial Product |
| Cost Range | Low |
| PHYSICAL PROPERTIES |
|---|
| Solid Content | 14.7 % Data Quality: Manufacturer's data |
| Viscosity | 800 cP Remark:No. 2 spindle at 20 rpm Brookfield Manufacturer’s Data Error: 200 cP |
| Shelf Life | 6 month |
| ELECTRICAL PROPERTIES |
|---|
| Electrical surface resistance | 1000 ohm-sq Remark: for 25 microns thickness Data Quality: Manufacturer's data |
| Electrical Volume Resistivity | 0.0254 ohm.m Data Quality: Manufacturer's data |
| THERMAL PROPERTIES |
|---|
| Temperature Range | -40 to 260 °C Data Quality: Manufacturer's data |
| OPTICAL PROPERTIES |
|---|
| Normal Emittance | 0.829 Remark:ECSS-Q-70-09 |
| Solar Absorbtance | 0.965 Remark:ECSS-Q-70-09 |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| UV Radiation | Δαs=0.01
Remark:5 years GEO |
| Flammability | Pass (21% O2) Kapton substrate Test:NASA NHB 8060-1B |
| Thermal Cycling | Pass Test: ECSS-Q-70-04 |
| Outgassing(Avg data) | TML = 0.65%, RML = 0.45%, CVCM = 0.005% Test: ECSS-Q-70-02 |
| SPECIAL RECOMMENDATIONS |
|---|
| Special Recommendations | Each lot of this paint must be checked for it’s Normal Emittance value, since large variations have been observed in this parameter, which is not systematically controlled by the manufacturer. |