| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of Araldite AV138/HV998 (100/40 pbw) |
| Material | Araldite AV138/HV998 (100/40 pbw) |
| Product Type | 2-part adhesive paste |
| Chemical Composition | Epoxy |
| Name of Manufacturer | Vantico Ltd.
Duxford, Cambridge CB2 4QA, UK +44 (0)1223 832121 +44 (0)1223 493230 info@vantico.com www.vantico.com |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Commercial Product |
| Cost Range | Low |
| Lot Reproducibility | Unknown |
| Space Experience | Good |
| PHYSICAL PROPERTIES |
|---|
| Pot Life | 30 min @ 23°C |
| MECHANICAL PROPERTIES |
|---|
| Ultimate Tensile Strength | 43 MPa 40 °C |
| ELECTRICAL PROPERTIES |
|---|
| Electrical Volume Resistivity | 1.9e13 @ 22 °C |
| THERMAL PROPERTIES |
|---|
| Thermal Conductivity | 0.35 W/m.K @ 30°C |
| Thermal Expansion Coefficient | 67 μstrain/°C Remark: Between 18°C and 93°C |
| Glass Transition Temperature | 66 °C Remark: T.M.A. |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| Flammability | Pass 24.5% O2 Test:NASA NHB 8060-1B |
| Offgassing Status | Pass Test:NASA NHB 8060-1A |
| Temperature Range(space) | Up to 120°C Test: Long term. |
| Outgassing Status | Pass |
| Outgassing(Avg data) | TML = 0.84%, RML =0.57%, CVCM = 0.02% Test: ECSS-Q-70-02 |
| SPECIAL RECOMMENDATIONS |
|---|
| Special Recommendations | Mixing ratio 100 parts AV138 to 40 parts HV998 by weight. · The material is available in thicknesses of 12, 25, 50, 75 and 125 microns. · Sensitivity to water absorption by the catalyst before use. This may degrade outgassing and mechanical properties. · Does not pass odour test with cure at RT; passes with cure at 65°C. · Recommended cure time: 48 hours at room temperature. · AV138M is newer version of AV138 |