| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of Aluminium |
| Material | Aluminium |
| Chemical Composition | 100Al |
| CAS Registry ID | 7429-90-5 |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Commercial Product |
| Cost Range | Low |
| Equivalent Designations | Al |
| Space Experience | Extensive |
| PHYSICAL PROPERTIES |
|---|
| Atomic Number | 13 |
| Atomic Weight | 27 amu |
| Work Function | 4.2 eV |
| Crystal Structure | Face centered cubic (fcc) |
| Specific Gravity | 2.7 |
| Magnetic Properties | Nonmagnetic |
| Relative Permeability | 1 |
| ELASTIC PROPERTIES |
|---|
| Tensile Modulus | 70.6 GPa |
| Bulk Modulus | 78.1 GPa |
| Poisson Ratio | 0.345 |
| Speed of Sound (longitudinal) | 6420 m/s |
| Speed of Sound (transverse) | 3040 m/s |
| Acoustic Impedance | 17.3 MRayls |
| ELECTRICAL PROPERTIES |
|---|
| Electrical Volume Resistivity | 2.67e-8 ohm.m |
| Superconductivity Critical Temperature | -272 °C |
| THERMAL PROPERTIES |
|---|
| Thermal Conductivity | 238 W/m.K |
| Thermal Expansion Coefficient | 23.5 µstrain/°C |
| Specific Heat | 0.917 J/g.K |
| Melting Range | 660 °C |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| EMF vs SCE | -0.76 V Remark: measured in 3.5% NaCl + water |
| Bimetallic Corrosion | Can be used in a non-controlled environment: Al alloys, Cd Can be used in a clean room environment: Mg, Sn-Pb alloys (all), Sn, Pb, Zn, Be Needs specific measures: All others |