| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of AA7049-T73 |
| Material | AA7049-T73 |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Commercial Product |
| Equivalent Designations | AA 7049 |
| PHYSICAL PROPERTIES |
|---|
| Crystal Structure | Face centered cubic (fcc) |
| Magnetic Properties | Nonmagnetic |
| ELASTIC PROPERTIES |
|---|
| Tensile Modulus | 71.7 GPa |
| Shear Modulus | 27.6 GPa |
| MECHANICAL PROPERTIES |
|---|
| Ultimate Tensile Strength | 517 MPA |
| Proof Stress (0.2%) | 448 MPa |
| Elongation | 12 % |
| Fracture Toughness (KIc) | 24 to 36 MPa.m^1/2 Remark:Depends on direction |
| Hardness | 155 Hv |
| Shear Strength | 303 MPa |
| THERMAL PROPERTIES |
|---|
| Temperature Range | 66 °C(maximum) |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| General Corrosion Status | Requires specific corrosion protection |
| Stress Corrosion Status | High Resistance to SCC: Table 1 Data Quality: Design Data |
| Bimetallic Corrosion | Can be used in a non-controlled environment: Al alloys, Cd
Can be used in a clean room environment: Mg, Sn-Pb alloys (all), Sn, Pb, Zn, Be Needs specific measures: All others Test: ECSS-Q-ST-70C Rev.1 Table 5.1 Data Quality: Design Data |
| FLUID SYSTEMS COMPATIBILITY |
|---|
| Gaseous Oxygen (GOX) | Meets the mechanical impact requirements. No batch test required. |
| Liquid Oxygen (LOX) | Fails mechanical impact |
| Nitrogen Tetroxide (N2O4) | SCC susceptibility is low and no fluid decomposition |
| Hydrazine (HDZE) | Untested |