| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of AA2195-T8P4 |
| Material | AA2195-T8P4 |
| Product Type | plate |
| Chemical Composition | Al-3.9Cu-0.04Fe-0.9Li-0.32Mg-0.14Zr-0.32Ag-0.02Ti |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Commercial Product |
| Equivalent Designations | AA 2195 |
| PHYSICAL PROPERTIES |
|---|
| Magnetic Properties | Nonmagnetic |
| ELASTIC PROPERTIES |
|---|
| Tensile Modulus | 72.8 to 81.4 GPa Data Quality: Limited Laboratory testing |
| MECHANICAL PROPERTIES |
|---|
| Ultimate Tensile Strength | 635 to 638 MPa Data Quality: Limited Laboratory testing |
| Proof Stress (0.2%) | 603 to 604 MPa Data Quality: Limited Laboratory testing |
| Elongation | 6.4 to 14 % Data Quality: Limited Laboratory testing |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| Stress Corrosion Status | Unknown Remark: Tested in L-direction once: Class 1 Test: ECSS-Q-70-37A Data Quality: Limited Laboratory testing |
| Bimetallic Corrosion | Can be used in a non-controlled environment with: Al+alloys, Cd, Sn-Pb alloys, Sn, Pb
Can be used in a clean room environment with: as above and Mg, Ni, Monel, Inconel, Ni-Mo alloys, 300 series SS, 400 series SS, Ti and Ti alloys, Zn, Be Needs specific measures: All others Remark: ECSS-Q-ST-70C Rev.1 table 5.1 Data Quality: Design Data |