| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of AA1200-0 |
| Material | AA1200-0 |
| Processing and Assembly | Annealed - products achieving the required annealed properties after hot forming processes may be designated as O temper |
| Product Type | Metal Alloy |
| Chemical Composition | 99.5% Al |
| Name of Manufacturer | Corus Postbus 10000, 1970 CA IJmuiden, The Netherlands +31 (0) 251 499111 +31 (0) 251 470000 feedback@ corusgroup.com www.corusgroup.com Alcan 7, Place du Chancelier Adenauer, 75116 PARIS, France 33) 1 56 28 20 00 www.ingot.alcan.com |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Commercial Product |
| PHYSICAL PROPERTIES |
|---|
| Crystal Structure | Face centered cubic (fcc) |
| Specific Gravity | 2.71 @RT |
| Magnetic Properties | Nonmagnetic |
| ELASTIC PROPERTIES |
|---|
| Tensile Modulus | 69 GPa |
| Shear Modulus | 26 GPa |
| MECHANICAL PROPERTIES |
|---|
| Ultimate Tensile Strength | 75 MPa(minimum) @RT Data Quality: Minimum specification Data |
| Proof Stress (0.2%) | 25 MPa(minimum) @RT Data Quality: Minimum specification Data |
| Elongation | 30 to 35% Data Quality: Typical Data |
| ELECTRICAL PROPERTIES |
|---|
| Electrical Volume Resistivity | 2.8e-8 ohm.m @RT |
| Electrical Conductivity | 58.5 %IACS |
| THERMAL PROPERTIES |
|---|
| Thermal Conductivity | 225 W/m.K |
| Thermal Expansion Coefficient | 24 µstrain/°C |
| Melting Range | 645 to 657 °C |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| General Corrosion Status | No specific corrosion protection required |
| Stress Corrosion Status | High Resistance to SCC: Table 1 Test:ECSS-Q-ST-70-37C Data Quality: Design Data |
| EMF vs SCE | -0.75 V |
| Bimetallic Corrosion | Can be used in a non-controlled environment: Al alloys, Cd
Can be used in a clean room environment: Mg, Sn-Pb alloys (all), Sn, Pb, Zn, Be Needs specific measures: All others Test: ECSS-Q-ST-70-71 table1 Data Quality: Design Data |