| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of 514.0 |
| Material | 514.0 |
| General Information | Typical data as cast |
| Precautions | This alloy is not recommended for high temperature application, 66°C and above |
| Chemical Composition | Al-4Mg |
| ELASTIC PROPERTIES |
|---|
| Shear Modulus | 26.5 GPa |
| Poisson Ratio | 0.33 |
| MECHANICAL PROPERTIES |
|---|
| Ultimate Tensile Strength | 172 MPa |
| Proof Stress (0.2%) | 117 MPa |
| Elongation | 9 % |
| Fatigue Limit | 48.3 MPa @5x10^8 cycles |
| Hardness | 50 HB |
| Shear Strength | 138 MPa |
| ELECTRICAL PROPERTIES |
|---|
| Electrical Volume Resistivity | 4.9e-8 ohm.m |
| THERMAL PROPERTIES |
|---|
| Thermal Conductivity | 138 W/m.K |
| Thermal Expansion Coefficient | 23.9 μstrain/°C |
| Specific Heat | 0.963 J/g.K |
| Melting Range | 600 to 640 °C |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| General Corrosion Status | Requires specific corrosion protection |
| Stress Corrosion Status | High Resistance to SCC: Table 1 High resistance to SCC in as cast condition |