Data still to be completed------(<---links)
	PRODUCT DATA of Makrofol N

Material	Makrofol N
Product Type	Plastic film.
Chemical Composition	Polycarbonate
Name of Manufacturer	Bayer AG Kaiser Wilhelm Allee, D-51373 Leverkusen, Germany www.bayer.de

	EXPERIENCE IN PRACTICE

Development Status	Commercial Product
Cost Range	Low
Lot Reproducibility	Fair
Space Experience	Good

	PHYSICAL PROPERTIES

Specific Gravity

1.2 Data Quality: Manufacturer's data

	ELECTRICAL PROPERTIES

Electrical Surface Resistivity	1e13 ohm-sq Remark: 4 days @ 80% RH
Dielectric Constant	3.1 Remark: 50 Hz
Dielectric Strength	170 kV/mm Remark: 4 days @ 80% RH
Dissipation Factor	0.0025 Remark:50 Hz

	RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY

Flammability	Fail (21% O2) Test:NASA NHB 8060-1B
Temperature Range(space)	Up to +140°C Data Quality: Manufacturer's data
Outgassing	TML = 1.4%, RML = 0.35%, CVCM = 0.01% Test: ECSS-Q-70-02
Water Absorption	0.005 Test: 24 hours immersion

	SPECIAL RECOMMENDATIONS

Special Recommendations

Post cure 24 hour at 80°C recommended. · Other grades of Makrofol exist, of which the space qualification is incomplete.