| All data is for information only------(<---links) | |
|---|---|
| PRODUCT DATA of CV-1142 |
| Material | CV-1142 |
| Safety Datasheet | CV-1142 |
| Product Datasheet | CV-1142P |
| General Information | Non-corrosive, controlled-volatility RTV silicone adhesive sealant |
| Chemical Composition | Phenyl Silicone. |
| Name of Manufacturer | NuSil Technology LLC
1050 Cindy Lane Carpinteria, CA 93013 USA Tel: +1 (805) 684-8780 |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Special Commercial Product |
| Cost Range | High |
| Lot Reproducibility | Good |
| Space Experience | High |
| PHYSICAL PROPERTIES |
|---|
| Specific Gravity | 1.1±0.02 @25°C |
| Appearance | Translucent elastomer |
| Shelf Life | 6 month Remark:@25°C. Refrigeration may extend shelf life. |
| ELECTRICAL PROPERTIES |
|---|
| Electrical Volume Resistivity | 1e13 ohm.m
Data Quality: Manufacturer's data |
| Dielectric Strength | 19.7 kV/mm
Data Quality: Manufacturer's data |
| OPTICAL PROPERTIES |
|---|
| Refractive Index | 1.43±0.005 Data Quality: Manufacturer's data |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| Temperature Range(space) | -115°C to 260°C |
| Outgassing | TML = 0.41%, RML = 0.31%, CVCM = 0.01% |
| SPECIAL RECOMMENDATIONS |
|---|
| Special Recommendations | A primer may be required on some bonding applications. Nusil SP-120 silicone primer is recommended. · Cure time at 25°C and 50% RH: - Tack-free time – 30 minutes. - Full cure – 7 days. · Thick sections may require extended cure times. |